T8 4ft 22W LED Tube, 5000K, (Replaces 80W) 2-Row LED Tube, ETL Listed, Ballast Bypass
Lighting up your indoor areas, LEDMyplace brings to you the 22-watt two-row dual-ended LED tube with a clear housing. Having a long operational life of more than 50,000 hours this tube lasts for more than 5 years even if used for more than 24 hours of the day. The beam angle of these tubes of more than 120 degrees and these have a clear or a frosted cover. This 22-watt tube is highly energy-efficient and has a color temperature of 5000 Kelvin. Having high energy-efficiency these tubes replace 80-watt fluorescent tubes which means your savings on utility bills will be massive. These tubes are IP44 rated which means that these tubes are protected from dust.
Features of T8 4ft 22W 2-Row LED Tube:
- Available Wattage:22W
- Available Size: 4ft
- Color Temperature Available: 5000K
- Lifespan - 50,000 hours
- Voltage: 100V - 277V
- ETL, DLC listed
- 5 years of Manufacturer's Warranty
- Ballast Bypass
Energy-efficient:
These tubes are highly energy-efficient and have an electricity-to-light conversion rated of more than 95% which means that only 5% of the power is lost as heat.
Long-lasting
These tubes have a rated operational life of more than 50,000 hours which means that these tubes last for more than a decade even if used for more than 12 hours of the day.
High CRI
These tubes have a high color rendering index of more than 80 which means that these tubes render colors that are 80% accurate in comparison with an ideal source of light such as daylight.
IP Rated
These tubes have an ingress protection rating of IP20 which means that these tubes are protected against dust and loose wires having a diameter of more than 1mm.
Low maintenance cost:
These tubes are long-lasting and do not require much maintenance, therefore, save you more money by reducing the cost of maintenance.
5 years warranty
These tubes have a hassle-free manufacturer’s warranty of 5 years which will save you the trouble for at least 5 years.
Ballast Bypass
This LED tube requires you to either remove the ballast or bypass it. We have prepared a step-by-step guide to help you bypass the ballast to successfully install your LED tube.
Flicker-free
These tubes do not produce any flicker while turning on because these tubes run on the LED technology. Neither do these lights produce a humming sound while in operation!
Specifications
Base Type: | G13 |
Brand: | LEDMyplace |
Color Rendering Index(CRI): | >80 CRI |
Dimensions (L x W x H): | 47.75 x 1.15 x 1.32 |
DLC Model no.: | WEN-T8-18P4FT2-C(5000K) |
Life Hours: | 50,000 Hours |
MPN (Part No.): | TB071 |
SKU: | WEN-T8-4FT-2RW-22WC5000K |
Warranty: | 5 Years |
Operating Temperature: | -4 Degree F To +113 Degree F |
Beam Angle: | 120° Beam Angle |
Certifications: | ETL, DLC Listed |
Color Temperature (Kelvin): | 5000 Kelvin |
DLC Listed: | Yes |
IP Rating: | IP44 Rated |
Lumens: | 3000 Lumens |
Replaces: | 80 Watt Replacement |
Voltage: | 100-277 Volt |
Wattage: | 22 Watt |
Product Review
Questions & Answers
Ask a Question-
installation no ballast or will work with ballast
This is ballast bypass.
-
which type of lamp holder does this bulb require? WEN-T8-4FT-2RW-22WC5000K
Shunted Tombstones
- Choosing a selection results in a full page refresh.